Conclusion. KEF R3 is a big standmounter by today’s standards, and it has dynamic and authoritative sound to show for it. It’s also mostly neutral and should let your’s system sound signature shine through. Just beware that less powerful amps won’t do it complete justice.
Do KEF R3 need a subwoofer?
If the speakers demand more power than can be supplied, the amplifier will clip (distortion) and the mid/high speaker will blow. If you listen to music with a lot of bass, then it is wise to also purchase one or two active subwoofer(s). KEF makes them too.
Where are KEF R3 speakers made?
KEF is named after its original site, Kent Engineering and Foundry. Product development, acoustical technology research and the manufacture of signature products still occurs at the original Maidstone site in England.
How far from the wall should a KEF R3 be?
We recommend having your speakers at least 225mm (9 in.) from the rear wall (measured from the back of the speaker).
Are KEF R3 good? – Related Questions
Is KEF worth the price?
They’re stellar all-rounders, aren’t too demanding when it comes to positioning, and are constructed to KEF’s exacting standards. If you have a healthy bank balance, they’re worth every penny.
Is KEF made in China?
The site is home to the manufacture of the Reference models and best premium Blade 2’s and statement Muon speakers. The Q and R series are made in China, in KEF’s own manufacturing facility there and no doubt for reasons of cost.
How far should my speakers be from wall?
Speakers should be at least 2-3 feet away from the nearest wall (especially if your speaker is in a corner). Many speakers have rear-facing bass ports. Positioning a rear bass port too close to the wall will reflect sound waves, resulting in time smearing.
How far should a ceiling speaker be from the wall?
How far apart should ceiling speakers be? Speakers should be installed at least 18 inches away from the wall, and as far apart as you’d have speakers on a conventional sound system. As a rule of thumb, they should be no closer than two meters to each other.
How far should my monitor speakers be from the wall?
Make sure that your speakers can be placed away from walls. Eight to twelve inches will be adequate to prevent sound waves from hitting the wall and reflecting back to you, causing phase cancellation and other potentially harmful acoustic interactions.
How far behind should surround speakers be?
Try to keep the speakers—especially rear vented models—at least two feet from the surface behind it, unless you use a vent plug. For best results when mounting surround speakers on a rear wall, position them so that they flank the main listening area and point toward the front of the room.
How high is too high for surround speakers?
When not installing immersive audio speakers, place the surround speakers approximately two feet above sitting ear height, which is generally 6 feet. The proper height when using immersive formats is a bit contentious as some state to place surround speakers at ear height, with tolerances up to 2 feet above ear height.
Should surround speakers be pointed at you?
In a 5.1 system your surround speakers are best placed to the left and right of your listening position. Aim them directly toward you for the best sound.
Should surround speakers be angled down?
Ideally, the surround speakers in a 5.1 surround sound configuration should be placed just behind or to the side of your listening position. What is this? Dolby recommends an angle of 110° to 120° from your listening position, as in the image below.
What is better 5.1 or 7.1 surround sound?
7.1 systems, on the other hand, make their advantages known immediately. Increasing the number of speaker channels gives you richer surround sound, and at the price ranges they usually operate at, the speaker build quality and audio capabilities are usually way, way ahead of any 5.1 system.
Should speakers overhang stand?
It’s not preferable to have a speaker overhanging the top plate, mainly because it makes the speaker more easily knocked off the stand. Some bookshelf speakers come with a rubber pad on the bottom, its best to have the top plate at least that big, in which case there might be a little overhang.
Which surround sound setting is best?
A good 5.1-channel system will give you a full surround sound experience. Most DVD and Blu-ray™ media, some Super Audio CDs (SACDs), broadcast TV, and many streaming sources are in 5.1-channel format. Going to 7.1 channels improves the directionality of sound effects and helps you feel more of your entertainment.
Which is better Dolby 7.1 or Atmos?
7.1 Surround: What’s the Difference? Dolby Atmos adds overhead sound and improved calibration software, which makes the sound deeper and more precise than traditional Surround 7.1 systems.
Is DTS better than Dolby?
Which is better: DTS or Dolby Digital? Based on the specs alone, DTS beats its rival with higher bit-rates that promise a more realistic movie experience. That said, other factors such as signal-to-noise ratio and speaker calibration mean that plenty of audiophiles would rate Dolby above DTS.