The REL 212/SX SUBWOOFERS have increased the overall performance level of my system(s) more than any other piece of equipment or acoustical room treatment I have ever made. Highly recommended!
Where is REL subwoofer made?
REL Acoustics Ltd. is a United Kingdom based manufacturer of high-end award winning sub-bass systems and subwoofers for use in two-channel and home theater systems for over 25 years. REL subwoofers are known for being the utmost in reliability, coupled with a natural sound quite uncommon in the category.
Which is the best subwoofer?
Shop This Guide
- SVS. SB-1000 Pro 12″ 325W Sealed Box Subwoofer.
- SVS. SB-3000 13″ Subwoofer.
- Klipsch. SPL-150SW 15″ Bass-Reflex Subwoofer.
- SVS. PB-1000 Pro Ported Subwoofer (Black Ash)
- SVS. 3000 Micro Subwoofer with Fully Active Dual 8-inch Drivers.
- Polk Audio. React Wireless Subwoofer for React Series Sound Bar.
- Sonos.
- Klipsch.
What is REL high level input?
The high-level, unbalanced, dual-channel (stereo) input is via a Neutrik® Speakon® connector which is connected to the power amplifier’s left and right channel speaker terminals. This has the advantage of ensuring that the REL receives exactly the same signal as the main speakers.
Are REL subwoofers good? – Related Questions
Is high level input better than RCA?
High Level or Speaker Level Inputs
Most of the time, the signal coming from the radio is about 10 volts which means less noise and generally better sound quality.
What does REL measure?
A rel was a Dalek unit of measurement, principally of time.
Is high level input better?
Using the High Level input is always the best option. Using the High Level Input, instead of the Low Level Input, and connecting to the speaker output terminals of your amplifier is one of the unique secrets of REL’s success.
What is high level and low level input?
High-Level (Speaker Level) Inputs:
Speaker level inputs are used when you want to connect an amplifier to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs. It allows you to use the signal coming from the speaker outputs as an input source for the amplifier.
How do you set REL?
How to Tune A REL
- Phase Orientation. With the REL in the corner the first step is to adjust for phase.
- Corner Fine Tuning. The next step is to determine precisely how far from the corner the sub should be placed to achieve the most efficient output, as well as the lowest frequency extension.
- Orientation.
- Final Settings.
How do you run a REL subwoofer?
We use cut #4 from the soundtrack to Sneakers, the movie. Once the system is up and running with your break-in cut, run it at moderate volume for around 15 minutes or so. This allows everything in the amplifier and driver time to adjust and begin warming up. This is an often-overlooked phase of break-in.
Should I leave my REL subwoofer on all the time?
Yes you can leave your subwoofer on all the time as long as it has an auto standby feature. Subwoofers in standby last longer & use less power. Older subwoofers that don’t have this function should be turned off when not in use as electricity escapes in the form of heat, causing the amplifier to get hotter than normal.
How long should you break in a sub for?
We suggest 20-24 hours for a solid break in time. You can set it with a good clean signal overnight. Once this is done you are ready to install and be on your way.
What happens if you don’t break your subwoofer?
If you choose to forgo breaking your sub in, you risk shortening the lifespan of the subwoofer and lowering the sound quality of the bass. While failing to break in a new sub will not result in any serious damage, it does mean your subwoofer is unable to perform at its very best.
Do subwoofers need to warm up?
Once the system is up and running with your break-in cut, run it at moderate volume for around 15 minutes or so. This allows everything in the amplifier and driver time to adjust and begin warming up.
Do subs sound better after break in?
The breaking-in process involves playing the subwoofer for a period of time after having it professionally installed in your car. The main benefit of this is to help loosen the unit’s suspension and improve overall performance and bass output. This will also help extend the life of your subwoofer.
How do I get more bass from my subwoofer?
It is recommended that for optimal quality sound, you should place your subwoofer within 8-12 inches of a wall, facing outwards towards the rest of the room. For even more output, consider placing your subwoofer in the corner of your room, as it can significantly increase the overall sound due to the positioning.
Which subwoofer is best for bass?
Our Subwoofer Picks
- Best Overall Subwoofer: SVS SB-1000 Pro.
- Best Budget Subwoofer: Monoprice 9723.
- Best High-End Subwoofer: SVS SB-3000.
- Best Wireless Subwoofer: Sonos Sub.
- Maximum Bass for Home Theater: Seaton Sound.
- Subwoofer with the Deepest Bass: KEF KC62.
- A Great Subwoofer for Music: RSL Speedwoofer 10S.
How many Hz is a good subwoofer?
The typical frequency range for a subwoofer is about 20–200 Hz for consumer products, below 100 Hz for professional live sound, and below 80 Hz in THX-certified systems.
What size subwoofer is best for bass?
An 8″ subwoofer is going to give you tight, clean bass. There are some 8-inch subwoofers that sound really nice and some might even compare them to a lower end 10″ or 12″, but generally speaking, an 8 subwoofer is going to give you nice, affordable, clean bass.
