So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.
How can I boost my factory radio?
Here are four different ways you can make your factory stereo sound better.
- Replace Your Factory Speakers. Most brand new cars come with the cheapest possible speakers.
- Add Satellite Radio.
- Add A Subwoofer.
- Install Sound-Deadening Mats.
Can I add an amp to my factory amp?
To add an amp, you’ll have to use the factory amplifiers’ outputs for your aftermarket amp’s high-level inputs. Make sure it can handle at least 12V, otherwise you’ll need to use a line output converter (LOC) for the amp’s input.
Will an amp improve factory speakers?
Better Sound Quality – Adding an amplifier can improve your sound by being a power source to really drive your speakers without straining them. A factory stereo’s built in amplifier is no match for the sound quality you can get from a separate aftermarket amplifier.
Can I hook up an amp and subs to a factory radio? – Related Questions
What happens if amp is more powerful than my speakers?
However, if your amp pushes much more power than your speakers can handle (if your turn up the volume way too much), that excessive power will turn into heat, and that heat could fry the voice coil.
How do I hook up amp to factory speakers?
Connect the RCA, speaker, and remote turn-on leads to your amp. Feed the RCA cable along the bottom of the doors, then plug it into the back of the amp. Once you’ve done this, plug the speaker and remote turn-on leads into the back of the amp. These wires may be different colors, depending on the manufacturer.
Can you use an amp on stock speakers?
Using a factory amplifier with new speakers can cause degradation of sound quality and the lifespan of the speakers. The power handling of your factory amplifier may also not match up to the speakers. For example, if your speakers can not handle the power output from your factory amp, speaker damage can occur.
Do amps make a difference with speakers?
The amplifier will make only a very tiny difference. Most people can not hear any difference from a cheap amp to an expensive one. As long as what you have has enough power to play as loud as you want, the differences are truly small.
How can I make my factory car speakers louder?
You can make your car speakers louder by installing sound-deadening materials around your vehicle, sealing the gaps between your speakers and their mounting holes, removing or securing loose items around your speakers, balancing your sound system’s tone controls, and only playing high-quality audio files.
Do you need an amp when upgrading car speakers?
However, every car audio system requires an amplifier, whether it’s a weak, built-in feature or a separate, high-powered unit. In fact, a car stereo wouldn’t work without one. Most car audio systems and simple upgrades don’t include a separate amplifier, although many include a dedicated amplifier to drive a subwoofer.
Should amp be stronger than speakers?
As a very vague rule of thumb, we normally recommend around twice as much amplifier power as speaker’s power rating. For example, if a speaker is rated at 200 watts, we’d use a 400 watt amp. Again, the idea is to have enough clean power to handle whatever you throw at the amp without clipping.
Can an amp be too weak for speakers?
If you don’t have a powerful enough amplifier to reach the volume levels you want, you can damage the speakers by feeding them too much high-frequency energy by driving the amplifier into clipping. It’s the extra power in these harmonics that damages speakers.
Is it worth upgrading factory car speakers?
Upgrading Your Stock Car Audio Speakers Can Drastically Improve Sound & Performance. Replacing your stock speakers with aftermarket, high performance car audio speakers is the #1 way to get better sound from a car stereo. Many people believe that the easiest way to get better sound is to change out the head unit.
Do 6X9 speakers have good bass?
The 6X9 inch speakers are considered one of the best ways to boost the sound quality of your car. They even provide you additional bass without the need of an additional amplifier or a subwoofer. At the same time, these speakers don’t burden your wallet much.
What happens if car speakers are underpowered?
No, you can’t permanently damage your speakers by under powering them, but by not delivering the appropriate amount of power to the speakers, the signal may be disrupted leading to audible distortion.
How can I improve the sound quality of my car radio?
Let us take a look at both these methods in detail.
- Find a replacement for your factory speakers.
- Upgrade Your Head Unit instead of relying on your mobile phone’s DAC!
- Adding Amplifiers, Signal Processors, and Band Equalizers,
- Using HD Audio and High Quality, Low Compression Music Files.
- Dampening the outside noise.
What is the best sound system for a car?
Best Car Speakers for Bass and Sound Quality Reviews
- Rockford Fosgate Prime 6.5″ Coaxial Speaker.
- JBL Premium 6.5-Inch Co-Axial Speaker.
- Pyle 6.5 Inch Mid Bass Speaker System.
- Pioneer G-Series Coaxial Car Stereo Speakers.
- Skar Audio Elite Coaxial Car Speakers.
- BOSS 4-inch Audio Systems Car Speakers.
How can I make my audio higher quality?
10 tips to improve audio quality
- Record in a quiet location.
- Avoid echo.
- Invest in a decent microphone (if you can)
- Get a microphone stand.
- Use a pop filter.
- Stay close to your microphone.
- Use a mixer to split up audio channels.
- Make a test recording.
How do I make my bass sound better in my car?
Just follow these simple steps for great bass:
- Remove the distortion.
- Flatten the signal, open the low-pass filter.
- Adjust the subwoofer gain and low-pass filter.
- Adjust the bass boost and subsonic filter.
- Match the subwoofer level to the receiver volume.