You will need a line output converter if you have a factory car stereo in your car. This is because the factory head unit generally tends to have speaker wires but does not have a preamp output that can convert them into RCA signals.
How do you hook up a sub and amp to a factory radio?
The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal.Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.
How do I connect my subwoofer to my radio?
Can you connect a subwoofer to a factory stereo? – Related Questions
Can you install a subwoofer without an amp?
Typically without an amp the standard speakers and the subwoofer output won’t produce a louder sound and the bass frequencies will be flat.
Should I add a subwoofer to my stereo?
Adding a sub to larger speakers also makes sense — in fact, all but the most humongous speakers benefit from adding a sub. Here’s the best part: Adding a sub isn’t just about more bass. With a great sub the system’s dynamics rock harder, and soundstage depth and spaciousness improve.
Can we connect subwoofer to car stereo?
Some subwoofers have a built-in amp. If the amp is separate, it may have its own colored wires to connect to the ones on the stereo. Use more crimp connectors or solder the wires together as needed. Otherwise, use the existing cables to connect it to your sound system.
Why is my subwoofer not connecting?
Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer. Trying a different speaker setting may resolve the issue. Consult the instruction manual of the stereo system or TV for additional information.
How do I add a subwoofer to my 2 channel stereo?
If you’re using two subs, connect the left-channel sub to the left pre-out, and the right-channel sub to the right pre-out. If you’re using a separate preamp and power amp, and the preamp has only a single set of pre-outs, you’ll need two RCA Y-adapters, to split the pre-outs to simultaneously feed power amp and sub.
How do I connect my subwoofer to my receiver or amp?
Connect a subwoofer through the subwoofer output (SUB OUT or SUBWOOFER) of a receiver using an LFE cable. Connect using an RCA cable if there isn’t an LFE subwoofer output or LFE input. If the subwoofer features spring clips, use the speaker output of the receiver to hook it all up.
What is the best way to hookup a subwoofer?
The optimal connection for a standard powered subwoofer is to use the RCA (Phono) “sub” or “woofer” line out found on home theater receivers and pre-amps. Some subwoofers offer “High Level inputs” (speaker wire connections) for use with a receiver or pre-amp without a sub RCA connection.
Why is my subwoofer not working with my receiver?
Common Issues
Solution: Check to see where the subwoofer is plugged into on the back of the receiver. It needs to be plugged into a dedicated subwoofer, or “sub out”, channel. It’s possible it may be plugged into an RCA port that is not sending any audio or low frequency content.
Can I connect subwoofer to normal amplifier?
To get started with the actual hook-up, you’ll connect the subwoofer to the amplifier using the RCA cable. If you want a stereo hook-up, you’ll need two sets of RCA cables. Connect the subwoofer output to the amplifier input.
Can you hook up a subwoofer to a stereo amp without sub OUT?
The best way to hook up a subwoofer to an amplifier with no dedicated subwoofer out is to use a “Y” splitter cable.
How do you know if a sub will work with amp?
The sub’s RMS watts rating must match the amp’s power range for optimal sound. Find the amp’s power in RMS watts at 4 ohms, 2 ohms, and 1 ohm. Choose the RMS power rating you’d like to achieve. Your sub’s total impedance will be the load impedance (ohms) of that rating.
Does regular amp work with Bass?
Yes, you can plug a bass into a guitar amp. While guitar amps aren’t designed to handle bass input, it will work. But there is a risk you can damage your guitar amp with a bass at a high volume.
How many watts is enough for a bass amp?
A 100 – 150 watt bass amp is the bare minimum to use for rehearsals and small gigs; 300 watts is better since it allows the amp to push out the same or louder volume with less effort or strain. A louder amp doesn’t have to work as hard, which means less chance of overheating, blowing a fuse or damaging a speaker.
