Can you connect a subwoofer to a factory stereo?

So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.

How do I add a subwoofer to my stereo?

If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.

How do I hook up my amp and sub to my factory stereo?

The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.

Can you connect a subwoofer to a factory stereo? – Related Questions

Can you hook up a subwoofer to a stereo amp without sub OUT?

The best way to hook up a subwoofer to an amplifier with no dedicated subwoofer out is to use a “Y” splitter cable.

Can I connect subwoofer to normal amplifier?

To get started with the actual hook-up, you’ll connect the subwoofer to the amplifier using the RCA cable. If you want a stereo hook-up, you’ll need two sets of RCA cables. Connect the subwoofer output to the amplifier input.

What wiring do I need for a sub and amp?

RCA cables and speaker wire

When running new speaker wires from your amplifier’s output to the speakers, any size wire from 18- to 14-gauge will work fine. (The lower the gauge number, the thicker the wire.) For subwoofers, use 16- to 12-gauge wires.

What wires do I need to hook up an amp and subwoofer in my car?

What wiring and accessories do I need? Car amplifiers don’t come with any wiring included. You must supply the amp’s power and ground wiring, an inline fuse, a remote turn-on wire, RCA cables, and speaker wires.

How do I connect my subwoofer to my receiver or amp?

Connect a subwoofer through the subwoofer output (SUB OUT or SUBWOOFER) of a receiver using an LFE cable. Connect using an RCA cable if there isn’t an LFE subwoofer output or LFE input. If the subwoofer features spring clips, use the speaker output of the receiver to hook it all up.

How do I wire my amp to my stereo?

What color is the factory amp wire?

One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.

How do you hook up a woofer to a car stereo?

How to Install a Subwoofer
  1. 1 Purchasing Wiring and Disconnecting the Battery.
  2. 2 Routing the Power Wire to the Engine.
  3. 3 Connecting the Subwoofers to the Stereo.
  4. 4 Securing the Ground Wire to Exposed Metal.
  5. 5 Wiring the Amplifier and Subwoofers.

How do I hook up amp to factory speakers?

Connect the RCA, speaker, and remote turn-on leads to your amp. Feed the RCA cable along the bottom of the doors, then plug it into the back of the amp. Once you’ve done this, plug the speaker and remote turn-on leads into the back of the amp. These wires may be different colors, depending on the manufacturer.

How many watts can factory speaker wire handle?

Factory speaker wires are very thin, with high electrical resistance, so they can cause noticeable power loss when higher wattages try to get through. But amplifiers of 75-watts or less aren’t really affected by this, so running their outputs through factory wiring remains a practical and convenient solution.

What happens when you bypass a factory amp?

By bypassing the factory amplifier, the music sounds more detailed and clear than it did when he used the amplifier integration harness. Whenever there’s one available, we recommend bypassing the factory amp to get better sound. If you’re considering a new stereo for your vehicle, keep this option in mind.

Will an amp improve factory speakers?

Better Sound Quality – Adding an amplifier can improve your sound by being a power source to really drive your speakers without straining them. A factory stereo’s built in amplifier is no match for the sound quality you can get from a separate aftermarket amplifier.

How can I make my factory stereo sound better?

Here are four different ways you can make your factory stereo sound better.
  1. Replace Your Factory Speakers. Most brand new cars come with the cheapest possible speakers.
  2. Add Satellite Radio.
  3. Add A Subwoofer.
  4. Install Sound-Deadening Mats.

Is it worth adding amp to factory speakers?

The factory stereo system in your car does everything you could possibly want it to do — except sound good. Replacing the speakers and adding an amplifier is the best way to upgrade sound quality, even for so-called premium systems.

What happens if amp is more powerful than my speakers?

However, if your amp pushes much more power than your speakers can handle (if your turn up the volume way too much), that excessive power will turn into heat, and that heat could fry the voice coil.

How much louder is 100 watts than 50?

The same thing holds true at higher wattages—a 100W amp is not going to sound twice as loud as a 50W amp; assuming identical speakers, it will only be 3 dB louder, which is noticeable, but definitely not a doubling of perceived loudness.

Does more watts mean more bass?

How’s it measured? Bass, as with most things, demands a comparison of quality vs quantity. More bass does not necessarily mean better bass. The power is determined by the wattage of the subwoofer in question, where a higher wattage demonstrates a more powerful subwoofer.

Leave a Comment