Can you hook up a subwoofer to a factory radio?

So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.

What are the problems with a Chevy Sonic?

The most common problems with the Chevy Sonic have been hesitating while shifting, the check engine light staying on for no clear reason, the engine not starting, and the ‘key in ignition’ sound not playing.

What is needed to install a sub?

If you’re installing a subwoofer that comes with a built-in amp, you won’t have to hook up speaker wires, but you will have to install a patch cord (or tap into your speaker leads for the input signal). You’ll need an amplifier wiring kit for power, ground and turn-on leads.

Can you hook up a subwoofer to a factory radio? – Related Questions

Is adding a sub worth it?

All in all, a subwoofer is an essential part of your system. If you’re on a budget or in the infancy of your home-theater development, start with just one subwoofer. As your system grows, think about adding a second low-toned beast to your setup. You’re adding more bass and evenly distributing it throughout the room.

Is installing a subwoofer worth it?

Subwoofers add bass and clarity to your stereo’s sound. And they can also add to a system’s performance in a variety of ways. A quality subwoofer will add depth and realism to your music that you would otherwise miss out on with a factory car stereo system.

Do you have to tell your insurance about a subwoofer?

Installing a new stereo and sound system alone won’t invalidate your car insurance – but not telling your insurance provider about it could. The most sensible thing is to talk to your insurance provider before investing in an audio system. They’ll be able to tell you if it will affect your premium.

How much does it cost to get a sub installed?

You will likely want a 100% copper wiring kit for optimum sound quality, with reliable wiring kits costing between $30 and $60. THE TOTAL COST OF SUBWOOFER INSTALLATION Add all of the components up, and your total cost of subwoofer installation can range from $100 to over $600.

Do subwoofers drain your battery?

The only ‘wear and tear’ damage that a powerful subwoofer would possibly cause: Pulling too much juice from the electrical/charging system, and thus draining the battery even when the engine is trying to keep it charged.

What cables do I need to install a subwoofer?

Any single, standard RCA or subwoofer cable should do just fine. However, if the sub is exhibiting a hum with the RCA/sub cable plugged into it, then maybe try using a “shielded” subwoofer cable. One end of the subwoofer/RCA cable will be plugged into the Subwoofer Output on the back of your receiver.

What do I need to connect sub to amp?

Connect the subwoofer RCA cables to the amplifier.

Connect the left channel on the subwoofer to the left channel on the amplifier and the right channel on the subwoofer to the right channel on the amplifier. If there is a separate power cord for the sub, you may need to attach this to the amp as well.

How much does it cost to get a sub installed?

You will likely want a 100% copper wiring kit for optimum sound quality, with reliable wiring kits costing between $30 and $60. THE TOTAL COST OF SUBWOOFER INSTALLATION Add all of the components up, and your total cost of subwoofer installation can range from $100 to over $600.

What do I need to hook up subs to a stock radio?

You will need a line output converter if you have a factory car stereo in your car. This is because the factory head unit generally tends to have speaker wires but does not have a preamp output that can convert them into RCA signals.

Can you use a stock radio with subs?

Adding a subwoofer to your factory stereo is a great way to improve your sound without giving up your familiar factory controls. In this video, you can follow along as one of our experts installs an amplifier and subwoofer in a car with a factory stereo.

Can you install subs without amp?

Typically without an amp the standard speakers and the subwoofer output won’t produce a louder sound and the bass frequencies will be flat.

Can you install a car sub without an amp?

Do You Need An Amplifier for Your Subwoofer? In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you’ll need to find an amplifier that will power your sub.

How do I hook up subs to amp and factory radio?

The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.

How do I wire a subwoofer into my car?

How do I tap my rear speakers into subs?

How To Tap Into Rear Speakers For Subs?
  1. Check To See If Your Car Has High Level Inputs.
  2. Use A Line Out Converter If Necessary.
  3. Tap Into The Rear Speaker Wires If Your Car Doesn’t Have High-Level Inputs.
  4. Use The Factory Subwoofer’s Speaker Wire If Available.

Do subs sound better facing front or back?

Facing the Boot – Rear of the Car

This is the most common direction used by the majority of custom car audio fanatics. By placing the subwoofer in the trunk against the last row of seats, facing away from the driver, the bass becomes more pronounced and evenly distributed across the car’s surface area.

What happens if you switch the positive and negative on a subwoofer?

Anytime two identical signals are mixed together with inverse polarity, the signals cancel out. In this case, one wave is positive while the other is negative, and vice versa. The result is silence. This is called destructive interference.

Leave a Comment