Can you hook up subs to a factory amp?

So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.

How do I hook up my amp and sub to my factory stereo?

The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.

Can you hook up a subwoofer to a stereo amp without sub OUT?

The best way to hook up a subwoofer to an amplifier with no dedicated subwoofer out is to use a “Y” splitter cable.

Can you hook up subs to a factory amp? – Related Questions

How do I install a subwoofer if I don t have a preamp subwoofer?

If your receiver doesn’t have a preamp output, you can treat the subwoofer like another speaker and use speaker wire to connect it to the receiver’s speaker terminals designated for the front left and right speakers. You would then connect the front left and right speakers to the subwoofer’s speaker-level terminals.

Does a subwoofer need both RCA cables?

In order to hook up a powered subwoofer properly, an RCA “splitter” cable (“Y” cable) is not needed. Any single, standard RCA or subwoofer cable should do just fine.

How to connect subwoofer to car stereo without subwoofer output?

RCA Cables

An easy way for how to connect a subwoofer to a receiver without a subwoofer output jack is to use a great subwoofer cable like RCA cables via RCA inputs. There will most likely be a preamp output on your stereo receiver even if it doesn’t have a subwoofer output.

Can I use an amp without a sub?

Yes, as long as the amplifier has a crossover or filter to keep it from playing the subwoofer (low) frequencies. Without it, a high powered amplifier could easily blow midrange and tweeter speakers. Low frequencies require a lot more power.

How do you hook up a subwoofer to an old amp?

You can connect your subwoofer using a line-level converter. This works with a subwoofer that has 1 or 2 RCA input jacks. A line-level converter converts a speaker-level output signal into an RCA preamp-level signal. This lets you connect the radio to the amplifier.

How do you connect a passive subwoofer to a stereo amp?

To do so connect the passive subwoofer to the external amplifier and connect the AV receiver/amplifier to the input of the external amplifier. Here you should use the Subwoofer PRE OUT socket on the A/V receiver/amplifier and connect this to the input of the external amplifier.

How do you hook up a powered subwoofer to a factory radio?

Steps in Installing a Powered Subwoofer to a Factory Stereo
  1. Step #1: Disable Battery Connection.
  2. Step #2: Install the Power Cable.
  3. Step #3: Check Cables for the Subwoofer.
  4. Step #4: Position Your Subwoofer.
  5. Step #6: Test Audio on Subwoofer.

Should I add a subwoofer to my stereo?

Adding a sub to larger speakers also makes sense — in fact, all but the most humongous speakers benefit from adding a sub. Here’s the best part: Adding a sub isn’t just about more bass. With a great sub the system’s dynamics rock harder, and soundstage depth and spaciousness improve.

Are passive subwoofers better?

The passive subwoofer is generally a better bet if you’re going to be using it in a small room, where space is a concern and where you don’t need a more powerful sound. The passive subwoofer is usually smaller and less bulky than the active subwoofer, although it produces a less intense sound.

When should you not use a subwoofer?

Thanks for visiting our premium content.
  1. Five Reasons Not to Use Subwoofers (and why they are wrong)
  2. Reason 1 – Subwoofers take up too much space.
  3. Reason2 – Subwoofers don’t blend well with mains.
  4. Reason 3 – There’s no music down there (20 – 80 Hz)
  5. Reason 4 – Subwoofers are hard to hook up right.

Is it better to have a subwoofer in front or behind you?

Subwoofer placement in the front of the room is the most common and usually results in the best blending with the main speakers and center channel and minimizes localization effects. Bass is omni-directional.

Do subwoofers hit harder facing up?

Facing the subwoofer upward while in the trunk, gives you big bass without consuming a lot of space. This direction offers crisp sound with a slight advantage to high frequencies and treble, and won’t rattle loose parts in your vehicle as much.

Should subwoofer be away from wall?

In fact, high-quality subs tend to sound their best when pulled at least 8 to 12 inches from any wall. Subwoofers also work better in the front half of your listening space, placed closer to your front-channel loudspeakers to lessen timing delays and phase cancellation.

Do subwoofers shake the floor?

Subwoofers deliver thundering, heart-stopping, pulse-pounding bass to literally shake the floors. But, that thunder can come from a couple of different places, depending on what subwoofer you choose to pursue for your killer home theater system.

How can I make my subwoofers punchy?

How do you get deep bass?

For deep bass, you’re going to want to use a low-pass filter to cut out the higher frequencies of the bass notes, and then shape it with the filter and amplitude envelopes. Using the low-pass filter cutoff, we cut the higher frequencies out. Next, played with the filter resonance to add some depth and color.

Why is my sub not hitting as hard as it used to?

There are many reasons why your subwoofer isn’t hitting high bass. One of the most common reasons is that you’re not giving it enough power. Other possible issues: The head unit might be faulty, or you have a grounding issue.

Leave a Comment