Does Audio-Technica AT2020 need a shock mount?

Since the AT2020 is a cardioid condenser microphone, you should always use it with a shock mount. The AT2020 has inner circuitry and a preamp that requires power, and because of this, the microphone is very sensitive, making it susceptible to resonance and other noises or interference.

What does a shock mount do for a microphone?

The shock mount can provide maximum isolation from handling vibrations and prevent unwanted movement of the microphone when you are recording. The shock mount allows you to adjust the angle of the microphone with a standard twist to tighten mechanism.

Does the Audio-Technica AT2020 come with a stand?

Audio-Technica AT2020 Overview

It comes with a pivoting stand mount for straightforward attachment to your existing mic stand.

Does Audio-Technica AT2020 need a shock mount? – Related Questions

Is the Audio-Technica AT2020 discontinued?

This product has been discontinued.

Is AT2020 better than Yeti?

When it comes to performance, again both are good, but the sound quality of Yeti is slightly superior when compared to AT2020. When you take all these factors into account, we can say that the Blue Yeti is a better product across all parameters when compared to AT2020 and it is a great bargain for what it offers.

What is included in AT2020?

AT2020 Cardioid Condenser Microphone
Microphones
Weight12.1 oz (345 g)
Dimensions6.38″ (162.0 mm) long, 2.05″ (52.0 mm) maximum body diameter
Output ConnectorIntegral 3-pin XLRM-type
Accessories IncludedAT2020 (black model): Stand mount for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch

What do you need for the Audio-Technica AT2020?

What you will need?
  1. 48v phantom power via your audio interface, mixer, or preamp. I would just go with an interface here.
  2. XLR cable(s).
  3. A Mic stand.
  4. A shock-mount.

Does the AT2035 come with a stand?

Along with its rugged construction and high-performance specifications, the AT2035 provides reliable consistency from model to model. It comes with a protective pouch and a custom shockmount.

How do I connect my mic stand to my AT2020?

How do you attach a shock mount to a mic stand?

What singers use AT2020?

The price of Audio Technica AT2020 cardioid condenser microphone is approximately $99 MSRP. This mic is used frequently by BILLIE EILISH. Billie’s song ‘Ocean Eyes’ was recorded with this mic.

How do I put my AT2020 on boom arm?

For the AT2020 microphone, thread the swivel mount onto the boom arm. The microphone may be inserted and threaded into the swivel mount by turning the ring nut on the mount. Make certain the microphone is fully secured into the mount. For the AT2035 microphone, thread the AT8458 shock mount onto the boom.

Does AT2020 need pop filter?

Quick Answer: Yes, the AT2020 needs a pop filter if you’re using it for podcasting, live streaming, or any other vocal application.

Do you need a boom arm?

A mic boom arm also allows you to get perfect mic placement much easier and with better posture. That means your voice sounds better. Also, if you get a shock mount (and you should), you will need a mic stand of some kind in order to attach it. It’s pretty crazy that one basic piece of equipment can do so much.

How much gain does an AT2020 need?

Raise the gain slider as you talk into the AT2020 until the meter is peaking in the “good” range. We found 38 dB worked for us, but this will vary depending on the natural volume of your voice.

Why is the AT2020 so popular?

Frankly, the Audio-Technica AT2020 isn’t the best microphone on the market, but it is one of the most affordable. At only $99 USD, its sound quality is pretty good, and the mic is built durably for the clumsy and those not yet familiar with the world of recording audio.

How far should AT2020 be?

One characteristic of the AT2020 that you must bear in mind is its polar pattern. It is a condenser mic, and works best when it is 6 to 8 inches away from your mouth. The pop filter should be around an inch away from the microphone. When talking at a normal level, the gain should hit around -12 dB.

Can you damage a microphone with too much gain?

False. Generally it is not at all likely that a loud sound will damage a microphone. A dynamic microphone can handle levels above 150dB SPL. That’s not a volume that can be achieved short of shoving a microphone into the exhaust of a jet engine.

Does screaming in your mic damage it?

Mics can handle high levels of sound pressure; therefore, yelling or screaming into your mic will not damage or break it; however, the diaphragms of mics can not tolerate air blasts, for example, vocal plosives. Vocal plosives can happen when a speaker or a singer pronounces certain consonants.

Leave a Comment