JL Audio car subwoofers are very high-quality and have a lot of power. They use high-quality materials to make great subs. If you need perfection, JL Audio is the way to go.
What are the best sounding 12 inch subwoofers?
Best 12-Inch Subwoofers: Reviews and Recommendations
- Best Overall: Rockford Fosgate P3D2-12.
- Best for Bass: MTX Audio TNP212DV Terminator.
- Best for the Money: Skar Audio EVL-12 D2.
- Best Shallow-Mount: Kicker 44CWCS124.
- Best Under $100: Pioneer TS-W126M.
- Best All-in-One: Rockford Fosgate P300-12 Punch.
Is JL Audio better than kicker?
The Kicker speakers are less expensive, but the JL speakers sound better. 8″ speakers have more surface area and usually handle more power than 6.5″ speakers. The larger cone area and higher power handling mean that the 8″ speakers play louder and give you more mid-bass response than a 6.5″.
How many watts is a JL Audio 12 inch subwoofer?
12W0v3-4 12-inch (300 mm) Subwoofer Driver, 4 Ω
|Continuous Power Handling (RMS)||300 W|
|Recommended Amplifier Power (RMS)||75 – 300 W|
|Nominal Impedance (Znom)||4 Ω|
Does JL Audio make good subwoofers? – Related Questions
Is 1000 watts good for a subwoofer?
A 1,000-watt subwoofer doesn’t have to play any louder than a 100-watt subwoofer. The watt rating is a rough guide to how loud a subwoofer might be able to play, but it doesn’t have to be louder. You always control the volume. In fact, a 1,000-watt sub may sound better at “regular” room volumes than a 100-watt sub.
Is 300 watts a lot for a subwoofer?
How many watts for subwoofer? As a general rule of thumb, it is best to go with at least 300 watts in order to get enough power for your subwoofer. You can always add more speakers if you want, but it is important that the amp matches the speaker system as well.
What Watts should you run 2 12 inch subs at?
RMS power handling of a 55 series 12” dual 2 ohm voice coil subwoofer is 400 watts. Two of these subwoofers would mean you need 800 watts of power at to the total circuit impedance.
How do I know what Watt my sub is?
Multiply the amperage and the volts to find the max wattage.
Take the speaker’s voltage and multiply it by the amperage to get a rough estimate of the maximum wattage. For example, if your speaker has 120V and 5A, multiply these numbers together to get 600 watts.
What 12 inch subwoofer has the highest RMS?
The Skar Audio EVL-12 D2 has by far the largest power-handling rating out of all the subwoofers on this list. With an RMS of 1250 watts, it’ll work with almost any subwoofer amp on the market.
How many watts is 400 RMS?
Sample Amplifier Power Rating Chart:
|# of Speakers||Each Speaker Rating (RMS)||Total Speaker Rating (RMS)|
|1||100 watts||100 watts|
|2||100 watts||200 watts|
|3||100 watts||300 watts|
|4||100 watts||400 watts|
Do subwoofers drain car battery?
The most common way a subwoofer can damage your car is by draining the battery. You’re adding extra strain to your electrical system when you put a subwoofer in your car. Sound vibrations take a lot of power to produce. The power required to run a subwoofer draws from your battery.
Does a higher RMS mean louder?
Root mean square is a measurement of how strong an electric current is, with higher RMS power generally meaning more powerful sound.
What size amp do I need for 500 watt speakers?
500 watts on a speaker rating is how much power it can handle without damage to itself. A 250 watt rating for an amplifier is the maximum power it can deliver without damage to itself.
What happens if your amp is too powerful?
Amplifiers can be too powerful for speakers. Speakers are limited by the electrical energy that they can convert into audio. As a general rule, if the amplifier produces more electrical energy than the speakers can handle, it may cause distortion or clipping, but damage is unlikely.
What size amp do I need for 1200 watt subs?
You will need an amplifier that can produce an output voltage of about 98 Volts. If the subwoofer has an impedance of 4 ohms, the amplifier’s output voltage has to be around 69 Volts.
How many watts do you need to gig bass?
A 100 – 150 watt bass amp is the bare minimum to use for rehearsals and small gigs; 300 watts is better since it allows the amp to push out the same or louder volume with less effort or strain. A louder amp doesn’t have to work as hard, which means less chance of overheating, blowing a fuse or damaging a speaker.
Does higher watts mean more bass?
How’s it measured? Bass, as with most things, demands a comparison of quality vs quantity. More bass does not necessarily mean better bass. The power is determined by the wattage of the subwoofer in question, where a higher wattage demonstrates a more powerful subwoofer.
Is a 100W bass amp loud enough for gig?
Bassists in loud rock bands should look to amps rated at 300 watts or more. Those in lower-volume groups ought to consider amps of at least 100 watts. Bassists who gig should choose a powerful bass amp if they have no other sound reinforcement.
Is 500 watts enough for bass?
You don’t need more than 500 watts then, unless your speaker is inefficient. I haven’t had a sound person in years. The headroom (even though I’m not playing at a louder volume than I was with my 500 watt head) helps me hear myself better. jamro217, jeff7bass, MobileHolmes and 3 others like this.
What Hz is best for deep bass?
The best Hz for bass is between 60-250 Hz, as recommended by professionals. These ranges protect speakers from damage and ensure optimal safety and listening experience for you. Listening to bass at too low a frequency outside of this range can damage hearing.