Polk Audio, Inc., warrants, to the original retail purchaser only, that the HOME LOUDSPEAKER(S), and PASSIVE CROSSOVER COMPONENT(S) on this Polk Audio Loudspeaker Product will be free from defects in material and workmanship for a period of two (2) years from the date of original retail purchase from Polk Audio.
To reset your device, press and hold the button “Microphone Mute” and “Volume Down” on the top of the product for at least 10 seconds.
How do you tell if a subwoofer is blown out?
Why is my Polk speaker not working?
If the soundbar cannot be turned on, check the power cord connection, AC adapter, or the power on button. Troubleshoot all above options. If all of them work normally, there is a high possibility that the motherboard is broken. To fix this, replace the motherboard follow this guide.
Does Polk have lifetime warranty? – Related Questions
How do you reset your subwoofer?
Press and hold the Power button while pressing the Input button and the VOL- button (at the same time). When RESET appears on the front panel display, release the buttons. Unplug the power cord for 30 seconds. Plug in the power cord and turn on the soundbar.
How do you sync Polk subwoofer to Polk soundbar?
Press and hold the SYNC button on the back of the subwoofer for 3 seconds. The green LED on the back of the subwoofer will start flashing at a faster rate, indicating that the sound bar and the subwoofer are connecting, the LED is solid green when connected and you hear a tone.
How do I reset my soundbar subwoofer?
How do you reset a Bluetooth subwoofer?
First, remove all the paired devices from the speaker. Then, press and hold the Bluetooth button and the power button simultaneously for more than three seconds to reset the speaker to factory settings.
What would cause a subwoofer to stop working?
If your subwoofer stopped working, there’s a good chance it was blown. To check, unplug the subwoofer and plug it back in. If it still doesn’t work, try switching the input from AUX to SUBWOOFER on the amp. If that doesn’t work, the subwoofer is probably blown and needs to be replaced.
How can I tell if my subwoofer fuse is blown?
Test the sound at a low volume to listen for whether your sub has been blown. If it is distorted, you have a partially blown subwoofer, and if there is no sound at all, it is completely blown. If the subwoofer is receiving its signal via a cable, then check the cable before rushing to conclusions. What is this?
Why is my subwoofer not making sound?
Increase the volume level on the subwoofer. Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer. Trying a different speaker setting may resolve the issue.
What are the common problems of the speakers?
Let us look at some of the most common audio system issues and their solutions.
No Sound Or Distorted Sound From Speakers.
Surround Sound Directions Seem Wrong Or Audio Does Not Work.
Music Lacks Treble Or Bass.
Audio Volume Gets Too Loud.
Can a subwoofer speaker be repaired?
Yes, you can fix a blown subwoofer especially when it is partially blown sub damaged cone. However, a damaged voice coil will be difficult to replace. Depending on the extent of the problem, the best solution is to purchase a new subwoofer.
Why does my sub have power but no sound?
Commonly, a blown subwoofer, issues with the connection and wiring, volume and other settings, input problems, short circuits and issues with the speaker can be some potential reasons behind a subwoofer not working even if the amp has power.
How do you troubleshoot a speaker?
Fix sound or audio problems in Windows
Check your speaker output.
Run the audio troubleshooter.
Verify that all Windows Updates are installed.
Check your cables, plugs, jacks, volume, speaker, and headphone connections.
Check sound settings.
Fix your audio drivers.
Set your audio device as the default device.
Do subwoofers have fuses?
If you have a DB12 subwoofer that is not turning on or has no power, you may need to replace the fuse.
What happens if you accidentally wire a sub backwards?
Wiring speakers backward, causes them to be out of phase. Phase cancellation results in certain frequencies being reduced in the output, and it is detrimental to the audio quality. It also negatively affects the stereo imaging of the speakers.
Does it matter which speaker wire is positive?
Good news is, with speakers it doesn’t really matter which one you choose as your positive and which as your negative, just so long as you are consistent. Ultimately, what you want is for the wire that connects to the red terminal on your Amp or Receiver to connect to the red terminal on your speaker.
How do I tell positive and negative on speaker wire?
Colour-coding: Speaker wires are often colour-coded, which will help you remember which one is positive and which one is negative. The most common colour coding is red and black, where red is positive and black is negative. Listen: When you are using your speakers, how is the sound quality?
