Since the AT2020 is a cardioid condenser microphone, you should always use it with a shock mount. The AT2020 has inner circuitry and a preamp that requires power, and because of this, the microphone is very sensitive, making it susceptible to resonance and other noises or interference.
How do I put my AT2020 on boom arm?
For the AT2020 microphone, thread the swivel mount onto the boom arm. The microphone may be inserted and threaded into the swivel mount by turning the ring nut on the mount. Make certain the microphone is fully secured into the mount. For the AT2035 microphone, thread the AT8458 shock mount onto the boom.
Is Audio Technica AT2020 worth it?
A good starter mic, but perhaps not the best. Frankly, the Audio-Technica AT2020 isn’t the best microphone on the market, but it is one of the most affordable. At only $99 USD, its sound quality is pretty good, and the mic is built durably for the clumsy and those not yet familiar with the world of recording audio.
Does the Audio Technica AT2020 come with a stand? – Related Questions
What streamers use AT2020?
The Audio-Technica AT2020 and higher models combine amazing sound quality and a reasonable price, which makes them some of the best microphones for streaming in 2022. Top streamers like Ninja, Pokimane, Yassuo and Dr.DisRespect use these microphones.
Is AT2020 USB good for singing?
Another important feature is the AT2020USB+ has a cardioid polar pattern – this is the best type of pattern for recording vocals, podcasts, or instruments in a studio. The cardioid polar pattern captures the sound entering the front of the microphone perfectly.
Is AT2020 better than Yeti?
When it comes to performance, again both are good, but the sound quality of Yeti is slightly superior when compared to AT2020. When you take all these factors into account, we can say that the Blue Yeti is a better product across all parameters when compared to AT2020 and it is a great bargain for what it offers.
What is better blue yeti or AT2020?
Between these two microphones, the Blue Yeti mic wins with 100 dB of S/N. The AT2020 has 26dB less at 74 dB. A long-time bestseller, this USB condenser microphone features a triple-capsule array so you can record in four polar patterns — cardioid, bidirectional, omnidirectional, and stereo.
Is the AT2020 USB better than the Blue Yeti?
The Yeti is really only suited for voice-over applications. Overall. Across the board, many people raved about the AT2020 over the Blue Yeti, even in reviews that had nothing to do with the Yeti. It’s safe to say that the sound quality from the 2020 is better, and should be at a higher price point.
Is the AT2020 better than the atr2500x?
They recorded at nearly the same level. However, the higher ranges of human speech were brought out a bit more efficiently in the AT2020. For higher pitch voices, the AT2020 would be the obvious weapon of choice.
How far should AT2020 be?
One characteristic of the AT2020 that you must bear in mind is its polar pattern. It is a condenser mic, and works best when it is 6 to 8 inches away from your mouth. The pop filter should be around an inch away from the microphone. When talking at a normal level, the gain should hit around -12 dB.
How can I make my AT2020 sound better?
Does the AT2020 need a preamp?
A preamp might be used to add some ‘color’ or ‘character’ to a mic, but is not necessary. Use what you have for a while before jumping to adding more gear. The fact you mentioned LDC AT2020 at 14.1 mv/pa and you have 48V on the Scarlett 2i2 you should not need anything else to get a sound to your DAW.
Why is my AT2020 so quiet?
If your AT2020 is quiet you may want to try the following: Be sure that you have the mic running to an audio interface with 48v PhantomPower via XLR female to XLR Male. Make sure the phantom power is turned on. A switch to turn it on is usually on the back or front of your interface.
How do I connect my mic stand to my AT2020?
What sample rate should I use for AT2020?
The output of the microphone is a USB-type connector. The microphone has a bit depth of 16 bits and a sample rate of 44.1 kHz. The microphone includes a 3.1 m (10′) USB cable that connects the microphone to any computer with a USB port.
Should I record 48khz or 96kHz?
48 kHz is the standard for music or sound placed in a movie or video. 96 kHz offers several advantages for both recording and mixing, but the main downside is that it requires more processing power from your computer and results in significantly larger audio files.
What sample rate do pro studios use?
Professional recording studios can record at 96kHz or even 192kHz. Then resample to 44.1kHz later to comply with the industry standards. Even audio interfaces used for home recording allow sample rates up to 192kHz.
How much gain does an AT2020 need?
Raise the gain slider as you talk into the AT2020 until the meter is peaking in the “good” range. We found 38 dB worked for us, but this will vary depending on the natural volume of your voice.
Can you damage a microphone with too much gain?
False. Generally it is not at all likely that a loud sound will damage a microphone. A dynamic microphone can handle levels above 150dB SPL. That’s not a volume that can be achieved short of shoving a microphone into the exhaust of a jet engine.
