Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver’s subwoofer output to the subwoofer’s line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.
Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.
Can I just add a subwoofer to my car?
So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good. If you’d like to know more about how to get a killer system set-up in your car without swapping your stereo, give us a call at 510-527-9888.
How do you hook up a powered subwoofer to a car?
How do you hook up a subwoofer? – Related Questions
Can you install a subwoofer without an amp?
Typically without an amp the standard speakers and the subwoofer output won’t produce a louder sound and the bass frequencies will be flat.
How much does it cost to get a subwoofer installed?
You will likely want a 100% copper wiring kit for optimum sound quality, with reliable wiring kits costing between $30 and $60. THE TOTAL COST OF SUBWOOFER INSTALLATION Add all of the components up, and your total cost of subwoofer installation can range from $100 to over $600.
Do you have to tell your insurance about a subwoofer?
Installing a new stereo and sound system alone won’t invalidate your car insurance – but not telling your insurance provider about it could. The most sensible thing is to talk to your insurance provider before investing in an audio system. They’ll be able to tell you if it will affect your premium.
Is adding a subwoofer worth it?
All in all, a subwoofer is an essential part of your system. If you’re on a budget or in the infancy of your home-theater development, start with just one subwoofer. As your system grows, think about adding a second low-toned beast to your setup. You’re adding more bass and evenly distributing it throughout the room.
Is installing a subwoofer worth it?
Subwoofers add bass and clarity to your stereo’s sound. And they can also add to a system’s performance in a variety of ways. A quality subwoofer will add depth and realism to your music that you would otherwise miss out on with a factory car stereo system.
Can you connect a powered subwoofer to a speaker wire output?
Connect a subwoofer through the subwoofer output (SUB OUT or SUBWOOFER) of a receiver using an LFE cable. Connect using an RCA cable if there isn’t an LFE subwoofer output or LFE input. If the subwoofer features spring clips, use the speaker output of the receiver to hook it all up.
What do you need to install a powered subwoofer?
For the installation, you need the following items:
A 20 ft (6.1 m) power wire.
A ground wire at least 3 ft (0.91 m) long.
A 15 ft (4.6 m) RCA wire with both red and white connectors.
A 15 ft (4.6 m) blue remote wire.
Speaker wire, which can also be bought separately.
A 60-amp in-line fuse and fuse holder.
How do you run a powered subwoofer?
Hook your sub up directly to your main speakers if LFE isn’t enabled.Connect the output of your amplifier/receiver to the subwoofer first.Then, connect the sub to the speakers. It’s important to connect to the sub first, especially if the sub has a crossover built-in.
How do you hook up a powered subwoofer to a factory radio?
Steps in Installing a Powered Subwoofer to a Factory Stereo
Step #1: Disable Battery Connection.
Step #2: Install the Power Cable.
Step #3: Check Cables for the Subwoofer.
Step #4: Position Your Subwoofer.
Step #6: Test Audio on Subwoofer.
Does a powered subwoofer need an amplifier?
However, Powered subwoofers are by far the most commonly used as they have their own built-in amplifiers and are not dependent on any amplifier limitations of another receiver or amplifier. This makes them very easy to use with home theater receivers.
Does a subwoofer need a power source?
Passive subwoofers require an additional power source like a receiver or amplifier. Active subwoofers include a built-in amplifier and power source and only need to receive an audio source.
Can you hook up a subwoofer to a stereo amp without sub OUT?
The best way to hook up a subwoofer to an amplifier with no dedicated subwoofer out is to use a “Y” splitter cable.
Does a subwoofer need both RCA cables?
In order to hook up a powered subwoofer properly, an RCA “splitter” cable (“Y” cable) is not needed. Any single, standard RCA or subwoofer cable should do just fine.
What is the easiest way to hook up a sub and amp?
Connect the subwoofer RCA cables to the amplifier.
Connect the left channel on the subwoofer to the left channel on the amplifier and the right channel on the subwoofer to the right channel on the amplifier. If there is a separate power cord for the sub, you may need to attach this to the amp as well.
Can any subwoofer go with any amp?
The sub’s RMS watts rating must match the amp’s power range for optimal sound. Find the amp’s power in RMS watts at 4 ohms, 2 ohms, and 1 ohm. Choose the RMS power rating you’d like to achieve. Your sub’s total impedance will be the load impedance (ohms) of that rating.
When should you not use a subwoofer?
Thanks for visiting our premium content.
Five Reasons Not to Use Subwoofers (and why they are wrong)
Reason 1 – Subwoofers take up too much space.
Reason2 – Subwoofers don’t blend well with mains.
Reason 3 – There’s no music down there (20 – 80 Hz)
