Power on the equipment you want to pair. Press and hold the Code Search button on the universal remote control until the light turns on. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a DVR, press the button for DVR).
The TV codes are: 000, 006, 011, 019, 027, 034, 038 and 044.
The VCR codes are: 000, 005, 007, 008, 028 035, 037, 054 and 069.
The cable box codes are: 000 and 027.
How do I sync my RCA remote to my TV?
Aim your remote at the TV panel and press and hold the ‘TV’ button on your RCA universal remote. Once the light is turned on, at the same time, press and hold the ‘On/Off’ and ‘TV’ buttons until the light turns on again. Press and hold the ‘Play’ or ‘Slow’ button on your RCA remote for five seconds.
How do I program my RCA 2 universal remote?
Point the remote directly at the front panel of the device you want to control. Press the POWER key and wait for the indicator light to blink. Each time the indicator light blinks, the remote is testing a code with the device. Make sure you keep the remote pointed at the device you want to operate.
How do you program a universal remote for RCA? – Related Questions
How do I program a universal remote without a code?
In programming your universal remote without a code, you’ll need to:
Hold down the SET and Zero (0) buttons on your universal remote four times at the same time.
You’ll then notice the LED light indicator (usually red) turns on steadily.
Why won’t my RCA universal remote won’t work?
Reset the remote. Remove the batteries, then press and hold the number 1 key on the remote for several seconds to reset the microprocessor inside the remote. Release the number 1 key, reinstall the batteries, and press the ON•OFF key. If it lights up, reprogram the remote and try again.
How do you reset the codes on a RCA universal remote?
Reset steps:
Remove the batteries. Press and hold down the #1 button on the keypad for 60 seconds – Note: You may need to do this 3-5 times to clear the remote. Insert batteries. Begin reprogramming – Note: After resetting the remote control, reprogramming is required.
How do you program a RCA universal remote to Walmart?
How do you pair a remote to a TV?
How can I find the exact code of my TV to use on a universal remote control?
How do you find out your TV code? Read the user manual of both the remote and the device (TV, DVD, etc.) Search online for a list of codes related to your device. Search online for any list of codes that is not brand-specific (recommended if you have an unbranded TV).
Do all universal remotes use the same codes?
Something else to bear in mind is that not all universal remotes use the same programming methods. While this guide is a generalized article for how to program a remote, refer to the specific instructions that come with your brand of remote. Every brand of universal remote is different.
Why won’t my universal remote program to my TV?
Make sure there are no obstructions between the device you wish to control and the remote itself. Most remote controls use infrared (IR) technology, which means they need to be aimed directly at the device you want to control. If something is blocking the remote, your commands will not work.
Will a universal control work on any TV?
As long as your smart TV has an Infrared sensor (or whatever connection type your remote uses, like Bluetooth or Wi-Fi), your universal remote should work with it. But some universal remotes will control only your TV’s power, volume, and channel up/down buttons.
Is my TV too old for a universal remote?
The good news is: yes, you can use a universal remote with any TV sold today. To replace your TV’s remote, you could buy a device-specific remote from your TV manufacturer, but this could prove expensive and is actually unnecessary.
How do I know if my TV remote is compatible?
Can I replace my TV remote control?
If you lost your remote control, or it has stopped working, then you don’t have to buy a device-specific replacement. There are universal remotes that are compatible with multiple devices, and there are even mobile apps you can use as a remote control until you buy a new one.
What do you do if your TV remote stops working?
For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control.
Reset the remote control.
Open the battery compartment cover and remove the batteries.
Press and hold the Power button for three seconds.
Insert the batteries again and close the battery compartment cover.
Can my phone replace my TV remote?
If your phone has an IR blaster, download a TV-remote app like AnyMote Smart IR Remote. Not only can it control your TV, but also any device that receives an IR signal—set-top boxes, DVD and Blu-ray players, stereo equipment and even some air-conditioning systems.
Can I use my phone as a TV remote?
Set up your virtual remote
On your Android phone, open the Google TV app . Near the bottom right, tap Remote . At the top, tap Scanning for devices. Choose your device.
Is there a free TV remote app?
The Android TV Remote Control app is an official Google product. You can use it to control any Android TV device that’s on the same Wi-Fi network as your smartphone.
