The WA-47 is a great sounding mic. I’ve used a few different U-47s and clones in different studios, and the WA-47 is my favorite one that I’ve used. The lows and mids are extremely detailed, meaning vocals and acoustic guitars recorded with this mic have a strong sound, with lots of rich character.
Does WA 8000 need phantom power?
The included PSU runs over 7-pin cabling to provide the perfect amount of power and get the most out of the WA-8000—no phantom power needed! Warm Audio’s WA-8000 will surely make any vocal recording stand out in a mix, providing elite brilliance and clarity.
Who owns warm audio?
Warm Audio began when founder Bryce Young had a desire to help aspiring musicians & engineers gain access to fully professional recording equipment. Warm Audio manufactures classic analog recording gear that many musicians only dreamt of owning just a few years ago.
Does a warm Audio 47 need phantom power?
The WA-47jr is primarily a studio condenser, which is to say it is a microphone that requires +48v phantom power and a balanced XLR to XLR microphone cable, and a preamp with a 3 pin XLR microphone input. The WA-47jr is capable of delivering three polar patterns: cardioid, omnidirectional, and figure of eight.
Is the warm audio mic worth it? – Related Questions
When should you not use phantom power?
Phantom power should not be used on Dynamic or Ribbon microphones. It’s also worth noting that phantom power should not be used on unbalanced cables. An example of an unbalance cable is a guitar lead. The reason for this is that typically microphone cables have 3 cores, 2 that send the signal and one that is a ground.
Is warm audio Made in China?
Warm Audio manufactures popular coveted pro audio equipment including; microphone preamplifiers, compressors, equalizers and microphones that are designed, developed and tested in-house in Texas, USA.
What is the highest quality audio source?
A lossless audio file format is the best format for sound quality. These include FLAC, WAV, or AIFF. These types of files are considered “hi-res” because they are better or equal to CD-quality.
Is warm audio good?
All-round workhorse. Warm Audio’s R2 version of the acclaimed WA-87 is sure to be a popular choice for home producers and professional studios alike. It’s a wonderful all-round workhorse that captures source sounds accurately and cleanly, while its low-noise performance is another strong selling point.
Which is the best brand in audio?
The 9 Best Speaker Brands – Black Friday 2022 Reviews
- Anker. Anker Soundcore Motion+
- Apple. Apple HomePod mini.
- Bose. Bose Portable Smart Speaker. SEE PRICE.
- Google. Google Nest Audio. SEARCH.
- JBL. JBL PartyBox 310. SEE PRICE.
- Sonos. Sonos Move. SEE PRICE.
- Sony. Sony XP700. SEE PRICE.
- Ultimate Ears. Ultimate Ears HYPERBOOM. SEE PRICE.
Which mics do not need phantom power?
Put simply, condenser microphones have active electronics that need an external power source, while dynamic mics are passive and therefore do not need phantom power.
Does the Sennheiser need phantom power?
The MD 421-II is a dynamic microphone and does not require 48V Phantom Power to operate.
What mics dont need phantom power?
Passive Microphones
Some moving-coil dynamic mics don’t even have an output transformer! There are no components in these microphones that require power, so we can refer to them as “passive microphones.” So no, passive microphones do not need phantom power to work properly.
What requires 48V phantom power?
Phantom power, commonly designated as +48V or P48, was designed to power microphones without using bulky external power supplies such as the ones required for tube microphones. It’s a way of sending the DC electrical current required through a balanced XLR cable.
Can phantom power damage an amp?
Most recording devices or mixers have microphone preamplifiers that put out phantom power. However, phantom power can damage some equipment, specifically any equipment with unbalanced outputs.
Do I need a preamp if I have phantom power?
To make a final statement about phantom power and preamps: Do you need both? In the case of a condenser microphone yes, for dynamic ones only a preamp. Whether they are built-in or not, it’s the way to make the most out of your vocal takes.
Does phantom power improve sound quality?
Adding a phantom power supply will boost the signal, allowing you to reduce the gain which will lower the background noise significantly, plus the overall sound quality will increase.
Will phantom power destroy a dynamic mic?
Re: Does the phantom power destroy a dynamic mic ? No; you’ll be fine connecting dynamic mics with the phantom-power ‘on’.
Does phantom power damage guitars?
It’s highly unlikely that subjecting your guitar to phantom power will cause any damage. Guitars are line-level devices that commonly use unbalanced, TS cables. Phantom power can only be sent through balanced cables – in most cases, 3-pin XLRs.
Can phantom power damage speakers?
In some cases, phantom power can also cause damage to unbalanced output devices. If you have ever turned on phantom power while your studio monitors are active, you’ve probably noticed the sharp pop that is sent through the speakers.
Can I run phantom power through a compressor?
The short answer is no, and don’t do that. :-) Your mixer contains a very important component, which is the mic preamp. The compressor wants to use line-level signal as input and output.
