GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk are expected to be mailed beginning March 1, 2021. Second notification letters will be mailed once the remedy is available.
What are the common problems with a 2012 Chevy Silverado?
What Problems Does the 2012 Chevrolet Silverado 1500 Have?
- Engine problems, including excessive oil consumption, are the most common issues.
- A clunking noise from the transmission is another problem mentioned by owners.
- Dashboard cracks are another issue brought up by Silverado owners.
How do I turn on Chevy Heads Up Display?
Using the Heads-Up Display
If you want to use it, you’ll need to turn it on. To do this, just find the button marked HUD on the dashboard. This will be to the left of the steering wheel. Pressing that will bring up the heads-up display.
How do you reset the dash lights on a Chevy Silverado?
Start the car, let it run for one second, and then turn it off. Let the engine sit quietly for two to three seconds, and then repeat the whole process two more times. If this doesn’t work, it’s not necessarily proof that there’s a deeper problem at play.
Is there a recall on 2012 Silverado? – Related Questions
Why is my dashboard not working at all?
If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.
How do I reset my Chevy dashboard?
Turn it on, but don’t start the car. Press and hold the button for about a second until you hear a beep. Press the button once so “no” is selected. The numbers will flash, and then all of them will reset to zero.
How do I reset my dash settings?
To restore the Dash to its preset default settings: Go to Settings > Dash settings > Factory reset.
How do I factory reset my dashboard?
To reset your device to its factory settings:
- Press and hold the button on the front of the device for about 15 seconds. The LED blinks red when the device is resetting.
- Wait for the LED to blink white to indicate it has successfully reset.
How do you reset the check engine light on a dashboard?
Simply place your key into the ignition and turn it on for 1-2 seconds, then turn it off for 1-2 seconds. Repeat this step three or four times. If the check engine light remains after the reset, you might still have a problem with your vehicle.
What do you do when your dashboard lights go out?
If your dashboard lights aren’t working, find the fuse associated with your dashboard lights and check inside. If the fuse has blown, replacing it may be all you need to do to fix the problem.
Is there a fuse for the dashboard?
Most modern vehicles have a fuse box located under the hood and another under the dashboard. The fuses for your instrument panel lights and the gauge cluster should be located under the dashboard or behind a panel near the driver’s side door.
What causes the instrument cluster to go out?
Wear and tear is the main reason an instrument cluster goes bad. The following things can happen over time: The indicator lights burn out. The back lighting burns out or gets dark spots.
Can battery cause the dashboard lights to go out?
The Dashboard Lights Flicker
Remember that your battery is responsible for the electrical components of your car, including the interior and dashboard lights. If you notice any flickering, be sure to check your battery before you end up stranded.
How do you know if your car battery went dead or your alternator went out?
Jumpstart your car. If you can turn the engine on, but it dies shortly thereafter, your car alternator likely isn’t able to charge the battery. On the other hand, if you jumpstart the car and later on it fails to start on its own, it’s likely a dead battery.
What are signs that your alternator is out?
7 Signs of a Failing Alternator
- Dim or Overly Bright Lights.
- Dead Battery.
- Slow or Malfunctioning Accessories.
- Trouble Starting or Frequent Stalling.
- Growling or Whining Noises.
- Smell of Burning Rubber or Wires.
- Battery Warning Light on Dash.
Can a car battery be dead and the lights still work?
Your dash lights won’t come on if your car battery is dead. Your dashboard warning lights can only operate and indicate a problem if some power is left in the battery. If your car battery is dead, you can jump-start it or you can check with your car insurance company to see if you have roadside assistance.
Can a dead fuse drain car battery?
No, it’s unlikely that a blown fuse is draining your battery. A fuse is a conduit for electricity. A blown fuse will simply stop a headlight or turn signal from functioning. In some cases, it can lead to an open circuit that draws energy.
