The right-front speaker wires are gray, left-front speakers are white, right-rear speakers are purple, and left-rear speakers are green. Ground wires are black, antenna wires are blue, and amplifier wires are blue with a white stripe.
and run positions and voltage should come back. This is the correct wire for Ignition/Accessory (red wire).
What do I connect the orange illumination wire to?
What are the radio wiring colors? – Related Questions
What is the brown wire for on a car stereo?
Audio Mute
Where does the yellow wire go on a car stereo?
What is orange wire on trailer lights?
Typically on a trailer with a 9-way installed the circuit with an orange wire is Reefer (tag) or Stop.
What do I connect the dimmer wire to?
With conventional dimmer wiring using NM cable, a NM cable supplies line voltage from the electrical panel to the dimmer outlet box. Another NM cable connects from this dimmer box to the light fixture box.
Where do key 1 and key 2 wires go?
The Key 1, Key 2, and Key GND wires will be used to interface steering wheel controls if your vehicle came equipped. Most newer vehicles will also need the Axxess ASWC-1 to translate the steering wheel controls to this stereo. Helpful? Thank you for your feedback!
Do I need to hook up power antenna wire?
Yes, these two wires should be connected together. This is what allows the radio to retract the antenna when it isn’t being used. Just because your wiring harness has a connection for this wire, it doesn’t necessarily mean that your car has this kind of motorized antenna.
Where do I connect the antenna wire?
What happens if antenna not grounded?
Your antenna mount needs to be properly grounded for your antenna to function correctly. Without a solid ground, you’re bound to get high SWR levels and extremely poor performance.
Where do you put the antenna wire?
Simply attach the antenna’s coaxial cable into the plug labeled “Antenna/Cable” on the back of your television set. If your TV is older than that, you’ll definitely need a digital tuner of some kind: either a VCR, DVD, or DVR with a digital tuner, or a digital converter box.
Why is my antenna not picking up local channels?
The signal could be lost in the coaxial cable distribution.
If you are using a splitter, this could also weaken signal strength. Try disconnecting the splitter and running the cable directly into the TV/converter box and run a channel scan. If reception improves, a distribution amplifier is likely to be the solution.
How do I get local channels with my antenna?
Connecting a TV antenna to a television is pretty simple, especially if you’re using an indoor TV antenna. Just plug one into the coax port on the back of your TV.Under settings, you will need to look for an “Air TV” or “Over-the-air” option and scan for channels. Using a TV antenna isn’t that complex.
How do I get my antenna to work?
How do I reset my antenna?
Press “set-up” or “menu” on the TV remote control or converter box. Select “channels,” “antenna,” or other similar terminology. Click “scan,” “auto-tune,” “channel search,” “auto-program,” or other similar terminology. The TV will do the rest.
Why is my antenna saying no signal?
The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength. If your TV uses an over-the-air antenna, you may need to adjust the antenna to improve the signal quality.
