Measuring just 125x90x32mm, the Topping E30 is a tiny outboard DAC/preamplifier capable of handling digital media up to 32-bit, 768kHz PCM and DSD512. It uses the well respected Asahi Kasei AK4493 digital converter chip and has USB, coaxial and optical inputs, plus a set of variable analogue outputs.
Is the Topping E30 worth it?
The E30 is more than acceptably built for the asking price and there’s no escaping that it is an unexpectedly convenient device to live with. The remote control, as well as offering volume, can switch between inputs, change the filters, put the E30 in standby and, if you are using it as a preamp, stick it line level.
How do I turn on topping on E30?
If you don’t plan on using the E30 as a preamp, I strongly recommend putting the E30 in the DAC mode, just enter standby, press and hold the On/Off button on the touch panel for about 3 seconds until you see “DAC” written on screen, release the button and power it on.
Does Topping E30 need an amp?
The E30 is not a very expensive DAC and yet offers a lot of versatility with USB, coax and optical inputs, alongside the RCA left and right channel outputs. It also has a pre-amp mode that will work with active speakers and power amps where the remote will allow you to adjust the volume.
What does a Topping E30 do? – Related Questions
How much HP does E30 add?
Originally, it came with 325 PS (321 hp / 239 kW), but in this E30, it’s reportedly producing an insane 1,100 horsepower. A Romanian tuning firm called WPP Performance is behind the project.
Are E30 good on gas?
The economic analysis showed that the use of E30 leads to an average decrease in fuel efficiency of approximately 0.64 MPG compared to E15. This minor variation in efficiency is usually offset by the lower price of E30 compared to E15.
Is the topping E30 better than the D30?
The vocal range is slightly more liquid with the E30, while the treble range is a touch more smoothed over when compared to the D30 Pro’s more honest presentation. The soundstage on both DACs seems to be equally wide, while the E30 seems a bit more expansive.
Does topping E30 have Bluetooth?
A very adventurous option is connecting the E30 to a Bluetooth Box E from Pro-Ject, or a Triangle AIO Connect, both of which are bluetooth receivers with an optical output, adding that extra bit of functionality to your DAC and system.
Is it easy to engine swap a E30?
The S38B38 “big six” engine from an E34 M5 can be swapped into an E30 but it is not an easy swap. The engine weighs about 100 pounds more than an M20 and the mounts, driveshaft, plumbing, and electronics all have to be fabricated.
Can topping E30 play MQA?
Topping E30 II also features a Direct DSD mode that allows the DSD signals to be decoded directly without any oversampling. It also supports MQA decoding. The best part here is that all three inputs, USB, Optical, and Coaxial support MQA signal decoding.
Is Hi-Res better than MQA?
The key difference between the two is that the Hi-Fi quality delivers tunes without any compression at CD-quality, 44.1kHz, and MQA offers audio representative of the original source. Compared to Hi-Fi quality, you can stream TIDAL Masters titles at up to 192kHz.
Is MQA better than HiFi?
HiFi audio is a superior sound but is still limited in its resolution—44.1 kHz /16 bit. TIDAL has partnered with MQA to deliver something substantially better: an authenticated and unbroken version (typically 96 kHz / 24 bit) with the highest possible resolution—as flawless as it sounded in the mastering suite.
Is MQA 24bit?
MQA files are generally in 96 kHz / 24 bit which is directly from the master source, offering you the experience just how the artist intended. It’s also interesting to know that MQA is actually backward compatible, so if your equipment lacks an MQA decoder it will be able to playback in CD quality.
Is MQA better than lossless?
MQA is not lossless regardless of the original sample rate. MQA adds unwanted noise and distortion. MQA is not usually sourced from a high sample rate master. The MQA ‘authentication’ indicator does not authenticate/guarantee anything.
Is 32bit Better than 24bit?
24-bit audio recordings can capture a dynamic range of up to 144.5 dB. Meanwhile, 32-bit float audio can capture the absolutely ludicrous range of up to 1,528 dB. That’s not only massively beyond the scope of 24-bit audio, but it’s beyond the scale of what even counts as a sound on Earth.
Is FLAC or MQA better?
If you only care about what’s definitely audible, a CD quality FLAC is good enough. If you want as much information as possible, audible or not, you want the full lossless hi-res FLAC file. MQA gives you some of the extra information but not all of it.
Is hi-res better than FLAC?
So, lossless audio doesn’t mean higher quality audio. Any audio, whether high-resolution or not, can be lossless. On the other hand, high-resolution audio is better quality audio that has a higher bit depth and a high sampling rate. High-resolution audio can be lossless or lossy.
Is hi-res audio the best?
Compared to compressed audio files like the commonly used AAC and MP3 formats, hi-res audio formats provide a much higher quality listening experience.
Is there anything better than FLAC?
This means that WAV files tend to be much bigger than FLAC files. Since it is uncompressed, WAV also performs very well in terms of pure quality and bitrate, with no limitations on things like bit-depth. So, from a technical standpoint, WAV can be seen as a slight winner in the FLAC vs. WAV quality and FLAC vs.
