The high-level, unbalanced, dual-channel (stereo) input is via a Neutrik® Speakon® connector which is connected to the power amplifier’s left and right channel speaker terminals. This has the advantage of ensuring that the REL receives exactly the same signal as the main speakers.
REL is one of the longest running scam companies in audio, IMO. Their products have always been overpriced and poorly engineered.
How do I connect my REL high level input to my amp?
How do I connect my REL subwoofer to my receiver?
What is REL high level input? – Related Questions
Should I leave my REL subwoofer on all the time?
Yes you can leave your subwoofer on all the time as long as it has an auto standby feature. Subwoofers in standby last longer & use less power. Older subwoofers that don’t have this function should be turned off when not in use as electricity escapes in the form of heat, causing the amplifier to get hotter than normal.
What is the best way to connect a subwoofer to a receiver?
Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver’s subwoofer output to the subwoofer’s line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.
Why is my subwoofer not working with my receiver?
Solution: Check to see where the subwoofer is plugged into on the back of the receiver. It needs to be plugged into a dedicated subwoofer, or “sub out”, channel. It’s possible it may be plugged into an RCA port that is not sending any audio or low frequency content.
How do you run a REL subwoofer?
We use cut #4 from the soundtrack to Sneakers, the movie. Once the system is up and running with your break-in cut, run it at moderate volume for around 15 minutes or so. This allows everything in the amplifier and driver time to adjust and begin warming up. This is an often-overlooked phase of break-in.
How do I manually pair my subwoofer?
How do I connect my subwoofer to my receiver without LFE?
An easy way for how to connect a subwoofer to a receiver without a subwoofer output jack is to use a great subwoofer cable like RCA cables via RCA inputs. There will most likely be a preamp output on your stereo receiver even if it doesn’t have a subwoofer output.
Is LFE same as subwoofer?
The difference between the LFE channel and the subwoofer output is that the LFE channel is used to carry additional bass information in the Dolby Digital program while the subwoofer output represents how some or all of the bass information will be reproduced.
Can I use an RCA cable for LFE?
1/LFE (Low Frequency Effects) connection is a dedicated true . 1 channel to be used for Surround Sound applications. It requires a RCA-to-RCA cable connected between your .1/LFE input on your REL and the subwoofer/.
Should you use LFE on subwoofer?
You should use the LFE/.1 input any time a REL subwoofer is being used in a Home Theater system. The Subwoofer/LFE/. 1 output from the processor or receiver should be connected to the .
Should I set my subwoofer mode to LFE or LFE and Main?
Selecting LFE allows the low frequencies from the . 1 of the track to output from the subwoofer. Selecting LFE+MAIN allows the LFE and the low frequencies from all speaker channels to be output to the subwoofer. You would normally select this option when decoding PCM based audio or playing back from an analog source.
Is it better to wire subs in series or parallel?
While series wiring of multiple subs increases the total effective impedance, parallel wiring of multiple loads lowers the total effective impedance. With subwoofers rated at equal impedances, the system impedance is equal to the impedance of one sub voice coil divided by the number of subs.
What should LFE level be set at?
The LFE channel should be capable of a 115 dB peak. Drive all channels to the max and the system should be able to slam you with approximately 120 dB of bass information.
What is the best frequency setting for subwoofer?
Tips for Setting the Proper Crossover Frequency of a Subwoofer
On-wall or Tiny ‘satellite’ speakers: 150-200 Hz.
Small center, surround, bookshelf: 100-120 Hz.
Mid-size center, surround, bookshelf: 80-100 Hz.
Large center, surround and bookshelf: 60-80 Hz.
Very large center, surround, bookshelf: 40-60 Hz.
What dB to set subwoofer to?
Most people find that 70 or 75 dB on your SPL meter at your listening seat is a comfortable playback level.
What frequency should I have my subwoofer at?
What is the recommended crossover frequency for a subwoofer? For home theater systems, 80 Hz is the recommended setting and the default setting out of the box. However, you can set the channel’s crossover between 40 Hz – 250 Hz based on which setting sounds best for your system.