What wire do I connect the illumination wire to?

What do I connect the dimmer wire to?

With conventional dimmer wiring using NM cable, a NM cable supplies line voltage from the electrical panel to the dimmer outlet box. Another NM cable connects from this dimmer box to the light fixture box.

Do I need to hook up power antenna wire?

Yes, these two wires should be connected together. This is what allows the radio to retract the antenna when it isn’t being used. Just because your wiring harness has a connection for this wire, it doesn’t necessarily mean that your car has this kind of motorized antenna.

What wire do I connect the illumination wire to? – Related Questions

What happens if you don’t ground an antenna?

Your antenna mount needs to be properly grounded for your antenna to function correctly. Without a solid ground, you’re bound to get high SWR levels and extremely poor performance.

Where do I connect the antenna wire?

Is Thicker wire better for antenna?

the better it will be for performance. A thick wire is always better than a thin wire.

What does the blue wire connect to?

Note that the blue wire is connected to the black fan wire so that they can both be operated by the same switch. Connect the ceiling fan blue wire to both the black fan wire and the black wire from the ceiling. This connection allows both the ceiling fan and light kit to be powered by a single light switch.

What color is power antenna wire?

One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.

Why do antennas have two wires?

Twin lead is mainly used as an antenna feedline at shortwave and VHF frequencies, to connect radio receivers and transmitters to their antennas.

What kind of wire is antenna wire?

Perhaps the most common wire used in antennas is copper ‘building’ wire. This is PVC plastic coated wire, seven strand, 2.5mm. It is the sort of product that most low-current electrical switchboards use.

Does my antenna need a power supply?

A TV Antenna Booster requires power to operate – and we find that in most instances to stop occurrences of power supply’s going missing or being turned off it’s advantageous to have these power supply’s installed within the roof cavity.

Do antennas need a power source?

But, the antenna needs (DC) power to operate properly. This power is supplied from a normal household power outlet by plugging the wall-wart into the outlet and the power-injector module. The power injector sends (DC) power to the antenna over the same coax that the antenna sends the amplified TV signal toward the TV.

Can an antenna work without power?

An antenna itself is just a metal stick. It doesn’t need power to function. What an antenna is doing is actually receiving a broadcast from the air.

Can I use power antenna wire for AMP turn on?

Yes you can substitute power antenna as remote on your head unit. Be sure to double check it comes alive in all modes when the unit is turned on. Essentially most vehicles have fixed antennas. Those that don’t are usually energized when the unit gets turned on or by the key when the car starts.

How do I turn on my amp without remote wire?

What is the blue power antenna wire for?

One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.

Is it OK to ground amp to battery?

Such a condition might cause damage or fire. So it is best to connect your amplifier lead to the frame end of the thick battery cable.

Is it better to ground to the frame or the battery?

Despite common belief, the battery ground is NOT the best place to ground accessories. The battery ground to body/engine/chassis is certainly required in order to complete the circuit which makes up the vehicles ground path.

What happens if you don’t ground a battery?

As electrons flow from negative to positive, if you don’t have good grounds, you will not have enough electrons to properly power the devices on the circuit. If the grounds are bad, you may have TOO MANY electrons on something like the engine block, which with components, such as the alternator, to burn out.

Leave a Comment