Why did my radio screen go black?

Why is my GMC Terrain screen not working?

Check the Wires

The fuse might be fine but the problem could be as simple as a loose wire. Check the back of the fuse box to see if there are any damaged or loose wires. You may simply need to re-secure a wire to get the touch screen back up and running.

How do I reset my GMC Terrain screen?

Go to the home screen of your GMC IntelliLink and select ‘Settings’. Choose ‘Return to Factory Settings’. There are three options that will pop up: ‘Restore Vehicle Settings’, ‘Clear All Private Data’, or ‘Restore Radio Settings’.

How do you reset the radio on a 2010 GMC Terrain?

Just follow the steps below:
  1. Navigate to your GMC IntelliLink home screen and click on ‘Settings.
  2. Select ‘Return to Factory Settings.
  3. You’ll be offered three options: Restore Vehicle Settings, Clear All Private Data, or Restore Radio Settings.
  4. When prompted to either Continue or Cancel, click ‘Continue.

Why did my radio screen go black? – Related Questions

Why is my radio display not working?

A damaged or defective fuse might lead your car radio display not to work. This particular fuse sits right between the display unit and the power line. If you installed a newer stereo system by replacing the stock one, there might be an issue where the aftermarket stereo won’t turn on due to a defective fuse.

Why is my radio suddenly not working?

Blown Fuse

The most likely reason for your radio’s sudden death is a blown fuse. All car radios have at least one fuse that protects it from power surges coming from somewhere else in the vehicle. The first thing you should do when your radio stops working is check its fuses and replace any that have blown.

How do I reboot my radio?

Unplug the Component

The easiest way to reset an audio component is to disconnect it from the power source, wait 30 seconds, and then plug it back in and try again.

How do you do a hard reset on a radio?

Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.

How do I get my radio reset code?

Vehicle handbook – You might find the code in your vehicle handbook under the stereo or security section. Alternatively, some codes are printed on a small paper or plastic card, found inside the handbook. Manufacturer website – The manufacturer’s website should give you more information about how to retrieve the code.

How do you unlock a GM radio 2010?

Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do you unlock the radio on a GMC Terrain?

Press the Hour button on the radio until the first two number of the code appear. Next, press the Minute button until the last two numbers of the code are displayed. Once all four digits appear, press the AM/FM button to unlock your stereo.

Is there a fuse that controls the radio?

A car radio will have at least one fuse to protect the unit from things like power surges or other electrical issues. If too much current is sent to the audio system, this fuse will blow out and disconnect the circuit to save the main radio.

How much does it cost to unlock a GM radio?

They will give you a four digit radio code. Many dealers will give you your radio code for free, while others may charge a small fee. If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee.

Why is my radio locked?

A lockout code protects against radio theft. If a thief disconnects the radio, the code locks the radio up, rendering it useless. However, it’s not much of a safeguard because the thief usually doesn’t know that the code has been tripped until he powers up the radio after he has removed it from the vehicle.

How do you bypass a radio lock?

Turn on the ignition. If the screen says CODE then turn off the radio. Press Down and the Power Button while holding for 60 seconds. It should bypass the radio and gives you access to music and radio.

What is a radio unlock code?

A car radio code is a short string of numbers associated with a security feature found in some head units. Its purpose is to prevent theft by rendering a stolen head unit useless when it’s disconnected from the battery.

What are common radio codes?

Most Common Codes
  • 10-1: Bad reception/Signal weak.
  • 10-9: Say again, or repeat, please.
  • 10-20: Advise to Location.
  • 10-36: Current time.
  • 10-69: Message received.
  • 10-77: Estimated time of arrival.

What is the 5 digit radio code?

The five or six digit code will be labeled “Anti-Theft Radio Code.” Enter this code through the preset radio buttons on your radio. You will hear a beep and then the radio will resume normal function. If you do not have a radio code inside you glove box, don’t worry. You can still retrieve it.

Can I get radio code from VIN number?

If the manufacturer that built your vehicle offers online code lookup, you typically enter your VIN, the serial number of the radio, and contact information, including phone number and email. The code may be emailed to you for your records.

What is my radio ID number?

Most radios will display the Radio ID (ESN or SID) when you tune to channel 0. If this doesn’t work on your radio, click here to find your radio listed and follow the instructions on how to display your Radio ID.

Leave a Comment