Check each set of wires and speakers to be sure no wire or lead is connected to a chassis ground. The radio will see this as a short and turn off the internal amplifier causing the on but no sound issue. Each speaker connected to the radio needs dedicated positive and negative leads from the radio to each speaker.
Silent stereos are usually caused by low power, a wrong source selection, disconnected or faulty speaker wires, broken speakers, or a malfunctioning source component.
Why did my dual radio stop working?
The most likely reason for your radio’s sudden death is a blown fuse. All car radios have at least one fuse that protects it from power surges coming from somewhere else in the vehicle. The first thing you should do when your radio stops working is check its fuses and replace any that have blown.
How do I reset my dual stereo?
Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located behind the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release.
Why does my dual radio turn on but no sound? – Related Questions
How do I know if my stereo fuse is blown?
Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
How do I reset my sound system?
Resetting the Home Audio System
Unplug the power cord, then plug it back in.
Press the ON/Standby button to turn on the system.
While holding down the (STOP) button, press the FUNCTION button for about 3 seconds.
How do I reset my stereo receiver?
How do you pair dual stereo?
What is the pairing code for a dual radio?
The device name is “Dual Media Player”. The Bluetooth passcode is “1234”.
How do you put dual stereo in pairing mode?
Bluetooth Pairing
by pressing on the head unit or press MODE until “BLUE-TOOTH” is displayed.signal for 90 seconds.
How do I listen to dual audio?
What is dual audio mode?
Bluetooth v5 introduced a feature named dual audio, through which audio can be played from a single phone to two different speakers/headphones connected over Bluetooth.
What app is needed for a dual Bluetooth radio?
Use the Dual iPlug Smart Remote app on an Apple® or Android™ smartphone to control the receiver via Bluetooth.
How do I use dual Bluetooth audio?
Android users need to go to Bluetooth Settings and pair either Bluetooth headphones or speakers one by one. Once connected, tap the three-dot icon on the right and click on Advanced Settings. Toggle on the ‘dual audio’ option if not already turned on. This should enable users to connect to two devices at once.
How can I make my Bluetooth dual audio?
In order to enable Samsung’s Dual Audio feature on your device, you must first pair each device with the desired Samsung Galaxy device.
Open your device’s Settings.
Go to Connections; this will be the first tab on a Samsung Galaxy S10e running Android 10, One UI version 2.1.
Tap Bluetooth and turn the slider to On.
How do I enable dual audio on my Iphone?
Follow the steps below:
Open Settings > Connections > Bluetooth > Advanced.
Toggle on the Dual audio option.
To start using Dual Audio, connect the phone to two speakers, two headphones, or either of the two. Music will then be transmitted to the two devices.
How do I enable dual audio on my phone?
Turn on Multipoint
On your Android device, tap Settings. Connected devices.
Next to your device, tap Settings .
Tap Multipoint. Use Multipoint.
Connect your headphones with the 2 desired audio source devices. To make sure your headphones are connected, go to Bluetooth settings on the audio source device.
Can you play music from two speakers at once iPhone?
With AirPlay 2 and iPhone, you can play audio on multiple AirPlay 2-enabled devices connected to the same Wi-Fi network. For example, you can play a party playlist on HomePod speakers in the living room and kitchen, on an Apple TV in the bedroom, and on an AirPlay 2-enabled smart TV in the den.
How do I change the audio output on my iPhone?
On your iPhone, iPad, or iPod touch
Open Control Center on your iPhone, iPad, or iPod touch.
Touch and hold the audio card in the upper-right corner of Control Center to control audio.
Tap , then choose the device that you want from the list.