Why does my radio turn on but no sound?

If your radio is turning on but there is no sound. First check radio functions, be sure you have an audio source selected like Radio. If using AUX, USB or BT AUDIO be sure you have a device connected to the correct input. Be sure the radio is not Muted.

Why is my car radio sound not working?

The most likely reason for your radio’s sudden death is a blown fuse. All car radios have at least one fuse that protects it from power surges coming from somewhere else in the vehicle. The first thing you should do when your radio stops working is check its fuses and replace any that have blown.

Why does my radio have power but wont turn on?

Most probably, the power wires of the stereo are in bad condition. While one power wire is always out, the other only heats up with the ignition key. But, if their functions get inverted, the stereo will stop working. If these power wires do not have any voltage, it is time to replace them.

Why does my radio turn on but no sound? – Related Questions

How can you tell if a radio is blown?

Keep your ears (and eyes) open for some of these issues:
  1. Distortion at Medium Volumes. The hissing or fuzzy sound of distortion is a common sign of partially blown speakers.
  2. No Vibration.
  3. Lack of Range.
  4. Rattling and Popping Sounds.
  5. Car Radio Isn’t Working.
  6. Infinite Impedance.
  7. Repairing Minor Damage.

How do you know if your radio fuse is blown?

Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

Is there a fuse for radio sound?

A car radio will have at least one fuse to protect the unit from things like power surges or other electrical issues. If too much current is sent to the audio system, this fuse will blow out and disconnect the circuit to save the main radio.

How do you do a hard reset on a radio?

Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.

How do you diagnose a radio problem?

Use a multimeter to test the stereo’s two power wires. This will help you determine if there is broken or faulty wiring. One power wire provides power to the stereo’s memory and is always hot. While the other wire is only hot when you turn on the ignition.

Can you tell if a fuse is blown without taking it out?

The blown fuse will be apparent because the wire element within will have melted or burned from the higher electrical current. You can also use a test light or a multimeter to identify the dead fuse without having to pull it out.

How do I know if I blew a fuse?

For a fuse box: If your electrical panel has fuses, check each fuse to see if the piece of metal inside has melted, or if the glass window at the top of the fuse has become discolored (usually purple or brown). That’s your home’s blown fuse.

Will disconnecting battery reset radio?

What happens to the radio and other electronics if I have to disconnect the battery? If you have to disconnect the battery in your car, several important systems will lose power. You’ll need to reset the clock, for one thing. You’ll also need to enter the radio code for your audio system when you replace the battery.

Can AutoZone replace a fuse?

Safeguard your whole electrical system by replacing fuses and circuit breakers at first sight of wear and tear or corrosion. Luckily, AutoZone provides you with top-quality fuses, fusible links and circuit breakers at the best price on the market.

What happens when a fuse burns out?

First, and most commonly, when too many lights or plug-in appliances draw power from the circuit, it can overload the capacity of the fuse and cause the metal ribbon inside the fuse to melt through. The result is that all lights, outlets, and appliances powered by the circuit will go dead suddenly.

What could be some reasons a car radio isn’t turning on?

5 REASONS WHY YOUR CAR RADIO MAY HAVE STOPPED WORKING IN THE PORTLAND AREA
  1. Your Radio May Be Equipped with Anti-Theft Technology.
  2. Antenna or Tuner has a Problem.
  3. There’s a problem with the Speakers or Their Wiring.
  4. There’s a Problem with the Wiring.
  5. A Fuse Needs to be Replaced.

How do you fix a stereo that won’t turn on?

My Stereo System Won’t Turn On
  1. Securely plug your device to a working wall outlet.
  2. Press and hold the POWER button, and unplug it from the wall outlet at the same time.
  3. Release the POWER button.
  4. Make sure that your device has enough ventilation.
  5. Plug your device back into a wall outlet.
  6. Turn on your device.

Can a car battery be dead if the radio still works?

Even if your lights, radio or accessories turn on, your battery may still be dead or undercharged. These components require a lot less power than the starter. Therefore, your battery may have enough ability to turn the radio/lights on, but not enough to turn on the starter.

How do I get my radio to turn on?

How do you do a hard reset on a radio?

Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.

Where is the stereo fuse located?

The interior fuse box is underneath the steering column. The under-hood fuse box is in the engine compartment next to the battery. If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse.

What do you do when your FM radio stops working?

FM radio not working on Android? Try these solutions
  1. Update OS to the latest software version.
  2. Reboot/Restart your phone.
  3. Clear app data and cache of Radio app.
  4. Download a third-party radio.
  5. Try to visit the official service center.
  6. Conclusion.

Leave a Comment