Why is my Chevy Silverado screen not working? The radio screen in a Chevy Silverado 1500 vehicle will go out for several reasons – most commonly a blown fuse or maybe if you hit something and knocked a wire loose. It can also be due to a problem with the display itself, or a problem with the circuit board.
How do you reset the radio on a 2015 Chevy Silverado?
Find the radio fuse in the passenger side dash fuse panel.
Unplug the fuse.
Wait about 30 seconds.
Plug it back in.
Turn the truck back on.
How do you reset the dash lights on a Chevy Silverado?
Start the car, let it run for one second, and then turn it off.Let the engine sit quietly for two to three seconds, and then repeat the whole process two more times. If this doesn’t work, it’s not necessarily proof that there’s a deeper problem at play.
How do you reset the radio on a 2014 Chevy Silverado?
Turn on your Chevy Silverado and remain parked. Turn on the audio system. Click and hold the radio power button for 10 seconds, and the vehicle will bypass the dealer code that appears. This action will turn off the stereo system; turning the radio back on will reset your system.
Why is my Chevy Silverado screen not working? – Related Questions
Where is the radio fuse on a 2015 Silverado?
How do I reset my Chevrolet screen?
How do you do a hard reset on a radio?
Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.
How do I unlock my 2014 Chevy radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How do I get my radio reset code?
Vehicle handbook – You might find the code in your vehicle handbook under the stereo or security section. Alternatively, some codes are printed on a small paper or plastic card, found inside the handbook. Manufacturer website – The manufacturer’s website should give you more information about how to retrieve the code.
How do I reset my radio without the code?
Turn on the ignition. If the screen says CODE then turn off the radio. Press and hold the Power/Volume button for 40-50 seconds. It should unlock your radio in under a minute.
Will disconnecting battery reset radio?
What happens to the radio and other electronics if I have to disconnect the battery? If you have to disconnect the battery in your car, several important systems will lose power. You’ll need to reset the clock, for one thing. You’ll also need to enter the radio code for your audio system when you replace the battery.
Why is my factory radio not working?
The most likely reason for your radio’s sudden death is a blown fuse. All car radios have at least one fuse that protects it from power surges coming from somewhere else in the vehicle. The first thing you should do when your radio stops working is check its fuses and replace any that have blown.
What is the 5 digit radio code?
The five or six digit code will be labeled “Anti-Theft Radio Code.” Enter this code through the preset radio buttons on your radio. You will hear a beep and then the radio will resume normal function. If you do not have a radio code inside you glove box, don’t worry. You can still retrieve it.
What are common radio codes?
Most Common Codes
10-1: Bad reception/Signal weak.
10-9: Say again, or repeat, please.
10-20: Advise to Location.
10-36: Current time.
10-69: Message received.
10-77: Estimated time of arrival.
How do I find my radio code online?
Visit the Manufacturer’s Website
Many automotive manufacturers have an online database that allows you to enter your year, make, model, VIN number, and even serial number to retrieve the security code or have it emailed to you.
What is a radio unlock code?
A car radio code is a short string of numbers associated with a security feature found in some head units. Its purpose is to prevent theft by rendering a stolen head unit useless when it’s disconnected from the battery.
Can I get radio code from VIN number?
If the manufacturer that built your vehicle offers online code lookup, you typically enter your VIN, the serial number of the radio, and contact information, including phone number and email. The code may be emailed to you for your records.
Why is my radio code not working?
This can happen when the battery in the car is disconnected or when the radio is replaced with a different model. If the radio code doesn’t work, you should check to see if there is a loose wire in the car or if it’s just not plugged into the right port.
What causes a radio to lock?
Your radio likely locked you out because a factory-enabled security system – one designed for anti-theft has been triggered. This system is designed to lock out car radio theft from accessing your audio system, but unfortunately, this feature can also lock out the car owner.
Why did my radio screen go black?
Restart Your Car’s Infotainment System
The reason you’re facing the black screen issue may not even be related to Android Auto on your phone. It could be that your car’s stereo system or head unit is malfunctioning, so you’re unable to use Android Auto. A quick fix for this issue is to restart your car’s head unit.
