Why my subwoofers are getting no sound?

Ensure the subwoofer has not been muted. Increase the volume level on the subwoofer. Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer.

Can you put subs in a 2012 Equinox?

If you want to go big on bass, an Equinox or Terrain has plenty of room for a subwoofer box in the cargo area — a 34″ W x 17″ D x 32″ (bottom)/27″ (top), to be precise. That’s a lot of room for boom, plus the amplifier you’ll need to power the sub(s).

Why wont my subwoofer turn on?

Perform a quick test on the wires to check that they work. Check outlets, power cable, and fuse. Most subwoofers have a “standby” LED that glows to indicate active power. If it’s not lit, check that the subwoofer is securely plugged into a wall socket, surge protector, or power strip.

Why my subwoofers are getting no sound? – Related Questions

How do I activate my subwoofer?

If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.

Is there a fuse for subwoofer?

If you have a DB12 subwoofer that is not turning on or has no power, you may need to replace the fuse.

How do I know if my subwoofer fuse is blown?

Test the sound at a low volume to listen for whether your sub has been blown. If it is distorted, you have a partially blown subwoofer, and if there is no sound at all, it is completely blown.

How do you reset a subwoofer?

Press and hold the Power button while pressing the Input button and the VOL- button (at the same time). When RESET appears on the front panel display, release the buttons. Unplug the power cord for 30 seconds.

How do you diagnose a subwoofer problem?

Very lightly tap on the center conductor of the other end of the cable. If the subwoofer is powered on and adjusted properly, you should be able to hear a thumping sound on the subwoofer. If you do not hear a thumping sound then there is a possible service issue with the subwoofer.

How do you tell if a sub is blown?

How do you reset a subwoofer?

Press and hold the Power button while pressing the Input button and the VOL- button (at the same time). When RESET appears on the front panel display, release the buttons. Unplug the power cord for 30 seconds.

Where is the fuse in a subwoofer?

REL Sub Bass Systems have a AC mains fuse located in the IEC receptacle where the power cord is plugged in.

How do I know if my sub amp is blown?

Will amp turn on if fuse is blown?

If the fuse is present and blown, the amp can’t turn on because the circuit providing mains voltage is open. Simply replacing the fuse may or may not solve the problem.

How do I reset my car amp?

Why is my sub and amp not working?

Step 1: Make sure that the amplifier is properly plugged in, and the power indicator is on. Step 2: Check if all the inputs to the amplifier are correct and tightly plugged in. Moreover, inspect the RAC cables if they are connected properly. Step 3: Every amplifier has certain voltage requirements.

How do I test my subwoofer?

How do you reset a subwoofer amp?

Unplug the subwoofer from the outlet

Using your hands, make sure these wires are connected, secure and tight. Put the amp back into the subwoofer and screw it back into place. Plug in the power cable to the subwoofer and see if you are now getting audio when sending signal.

Leave a Comment